Please make sure it matches your CameraFTP subscription.įor most home users or casual users, 320x240 is ok.įor better image quality, you can choose 640x480.

You can select the image resolution on the right-hand side. In the above screen, click “Mode 1 to view”, it will open the following page: Mode 2 also works, but is missing a few advanced features. You will need to install an ActiveX player. To access more advanced features, Mode 1 (using Internet Explorer browser) is recommended. Open a web browser and access the Camera’s configuration page at: (Please replace the IP address with the real IP address found using the SwannEye Search Tool).Īccording to the manual, the default username and password is: admin and 123456 Step 2: Configure the Camera Using the Web-based Configuration Tool Select a camera device, the camera’s IP address will be displayed on the right-hand side. If it finds any cameras, it will be listed in the Device list. It should automatically popup the following window:Ĭlick on “Open the SwannEye Search Tool”, it will open the following window:Ĭlick “Search (F3)”, it will search for connected cameras within the same network. Turn on the camera connect the camera with a network router using an Ethernet cable.įrom a PC in the same network, insert the camera’s software CD.

Step 1: Setup the Camera – Find the Camera’s IP Address Please refer to the manufacturer’s manual for more detailed information. In general, users shall contact the manufacturer for technical support. The information is provided as is based on our knowledge of the model SWADS-440IPC. Note: This document is not designed to replace the product manual from the manufacturer. Configure Swann Wireless IP Network Camera with CameraFTP Service for Cloud Recording, Remote Monitoring and Playback

Wanscam ip search tool android